FRD Brochure 2017v2f

Please download our new FRD_Brochure-2017v5r.pdf (750KB pdf file in new window).

This brochure shows our most popular touch up repair products, for the full range of products please contact our office (Tel: +44 (0) 131 661 9506, Email: This email address is being protected from spambots. You need JavaScript enabled to view it. .

Subcategories

Touch Up Markers

Dye Felt Markers

Touch Up Solution’s easiest marker to use and maintain is a capillary flow marker with dye (translucent) colour. Ideal for adding and adjusting shades on top of a base colour without any muddy effect. However, it is not suitable for use directly on to of substrates. Available in 24 colours.

 

 

 

 

 

Pigmented Valve Markers

Valve Marker designed for lighter to dark transparent wood finishes and laminate. Contains pigments, which seal, stain and finish in one easy operation. Ideal for edge and scratch re-colouring and can be used in conjunction with Fill Sticks and Burn-In sticks. For further protection it can be over-sprayed with Aerosol Topcoats. Available in 48 colours.

 

Basecoat Valve Markers

Basecoat Valve Marker designed for easy flow (opaque) colour. Used for touching up light and dark stained or painted wood finishes with burn marks, glue lines, fills and other objectionable colours in substrate. Available in 8 colours.

 

Graining Pen Brush

Graining Pen Brush is designed for excellent flow and adhesion. This formulation is mainly used for grain repair and scratches on wood and laminate. Ideal for graining over Fill Sticks, Burn-In Sticks, Epoxy Sticks, etc. For extra durability, seal with a clear topcoat. Available in 12 colours.

Powder Sticks

A new version of powder stain in an easy to apply stick. It can be used to add colour over a patch. Also ideal for replacing colour on raw or finished edges. It has to be sealed with a finish. Available in 24 colours.

 

Clear Valve Markers

Waterborne Finish Marker for durable small finishing repairs on flooring and furniture. Note may take up to 8 hours to fully dry. Available in Gloss, Semi-gloss, Satin and Flat.

Fillers

Fillers

Fill Sticks

An easy to use rub-on semi-hard putty for filling in nicks and scratches. Can be protected with Top Coat aerosols. No special tools required, simply rub in and wipe off. Available in 72 colours.

 

Burn-Sticks in Flat – Heat Gun applied

A harder low sheen stick that makes filling nicks, dents and scratches quick and easy. Applied with a special small heat gun. Can be used on wood, vinyl wrap and photo-laminates. Available in 25 colours.

 

Burn-Sticks in Flat

A Burn-In Stick that produces a non-brittle flat sheen, ideal for modern satin or flat finishes and laminates that is applied with a Burn-In knife. As repair is hard and durable, it can be used on heavy wear areas, including table tops, worktops and flooring. Available in 24 colours, which can be intermixed to produce exact shade required.

 

Burn-Sticks in Gloss

Use with Burn-In knife to professionally fill defects on wood top and edge surfaces. As repair is hard and durable, it can be used on heavy wear areas with gloss sheen finish. Available in 12 colours.

 

Epoxy Sticks

Epoxy Stick enables you to re-store, rebuild and repair all kinds of wood and other hard surfaces. Ideal for damaged corners, moulding and larger damages to make durable permanent repairs. Available in 9 colours that can be intermixed to produce exact shade required.

 

Install Series – Finish Putty

A simple to use finger filler. Designed to be used on finished wood to fill nail holes, mitre joints and cabinet seams. Excellent for cabinet fitting, picture frames, trim and moulding. Use Topcoat to lock down filler.

 

Aerosol Finishing

 

Flow Out Top Coat Aerosol

Aerosol is formulated for quick drying. Ideal for a quick touch up, production lines or cabinet shops. Medium solids/medium build and available in gloss, semi-gloss, satin, Flat and Dead Flat sheens.

 

Extra Flow Top Coat Aerosol

Aerosol is formulated for quick drying. Ideal for a quick touch up, production lines or cabinet shops. Medium solids/medium build and available in gloss, semi-gloss, satin, Flat and Dead Flat sheens.

 

Pro Series Top Coat Aerosol

Aerosol is formulated for quick drying. Ideal for a quick touch up, production lines or cabinet shops. Medium solids/medium build and available in gloss, semi-gloss, satin, Flat and Dead Flat sheens.

 

UV Repair Top Coat Aerosol

Aerosol is formulated for quick drying. Ideal for a quick touch up, production lines or cabinet shops. Medium solids/medium build and available in gloss, semi-gloss, satin, Flat and Dead Flat sheens.

CA Glues